Standard Insulation Class Ratings for Dolin Motors and Gearmotors

Saturday - 27/10/2018 18:22
Electric motors are categorized by temperature into groups called insulation classes which rate what temperature a motor can safely run at.
Standard Insulation Class Ratings for Dolin Motors and Gearmotors
Standard Insulation Class Ratings for Dolin Motors and Gearmotors
Temperature ratings are important to understand because a motor running too hot can cause premature motor failure.

Dolin Standard Motor Insulation Class Rating

pmdc, ac, brushless, universal, motors, fractional hp motors, hp manufacturer, gear motor Dolin standard motor and gearmotor designs are built in accordance to the following UL insulation class ratings:

    DC products – class B (130°C) —ask about options for class F
    AC products – class H (180°C)
    Brushless products – class H (180°C)
    Universal products – class A (105°C)

Our standard motors are built with industrial applications in mind and are insulated to perform in these environments. We also have the ability to customize the motor insulation if necessary.

Our engineering team utilizes an advanced software that allows us to calculate what temperature a motor will operate at based on the application’s duty cycle and the ambient temperature of the application.

We use a number of components to allow our motors to safely operate at their rated temperatures. This includes things such as the following: enamel coating on the magnet wire, insulation papers between the wires, sleeves where the leads connect to the magnet wire, and drip and dip varnishes on motor components prior to baking.

Which factors affect the insulation requirements of a motor?

There are many factors that can impact a motor’s performance, but we will focus on three that could cause your motor to overheat if overlooked.

Duty Cycle

    Insulation class ratings are based on motors running at continuous duty.

    Intermittent duty applications take resting (or off) periods into account, which allows the motor to run higher than its rated load for short periods of time.

Operating Load

    When sizing a motor for a specific application, the load of the motor should be taken into consideration. Overloading the motor will make it work harder, therefore causing it to run hotter than designed.

    Make sure to spec a motor based on the maximum load it will operate at to prevent premature motor failure caused by overheating. It is possible to run a motor at stall and will not cause the motor to overheat if only hitting it for a short amount of time.

    If you are unsure about your operating load, consider purchasing a motor at a larger capacity and using a control to help determine your specs for future purchases.

Ambient Temperature

    Ambient temperatures are an important, but often overlooked, factor in choosing the correct motor. The same motor will run hotter in a pizza oven application than it will on a conveyor line in an air conditioned building.

    Room temperature is 21°C (70°F)

For a more in-depth checklist for determining why a motor is running above its rated temperature or to prevent overheating in your motor, check out our blog “6 Reasons Your Motor is Overheating.”

What happens when a motor overheats?

A motor overheats when the insulation of the motor exceeds its rated temperature. This overheating and insulation failure can result in wire shorts, loss of electrical connection, and melted brushes (in DC motor types). Motors that have overheated will run less effectively or possibly not at all.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article

  Reader Comments

Security Code   
online
  • Support

    Sales Manager

    +(84)923.886.133

    dolin@dolin.com.vn

    Sales 01

    +(84)918.26.11.44

    dolinvn@dolin.com.vn

    Sales 02

    +(84)941.976.189

    info@dolin.com.vn

    Sales 03

    +(84)923.886.191

    sales@dolin.com.vn

    Sales 04

    +(84)949.380.913

    dolinsales@dolin.com.vn

    Sales 05:

    +(84)987.246.757

    dolin@dolin.com.vn

Google+
Bestsellers
Software
CNC Machine
Construction and Land
Counter
  • Online47
  • Search engine36
  • Guest11
  • Today25,037
  • This month344,373
  • Total9,424,517
You did not use the site, Click here to remain logged. Timeout: 60 second